14g Tek Screws
14g Tek Screws Selection:
You'll find many types of 14g tek screws in this category. All 14g tek screws feature a 4.5mm drill tip and are designed to self drill into steels and metals up to 4.5mm thick. We stock tek screws in zinc plated, galvanised and ceramic coated finishes in a variety of head types. Wafer heads, hex heads, countersunk heads and the wafer button style. If you need an increased drill capacity check out our series 500 an series 600 screws which have a 9mm and 15mm drill capacity respectively.
For specific types of screws, please use the top menu or use the filtering panel to the left hand side of the page
All screws are in stock and ready for despatch
14g Tek Screw Features
All 14g tek screws feature a 4.5mm drill tip with a 4.5mm drill capacity. Hex head tek screws in a 14g are all 3/8" drive, wafer head, button head and countersunk head tek screws all have a phillips no 2 driver, with the exception of the wing tip screws in a 14g which feature a hex 5 drive. Hex head tek screws and any type of wafer tek are measured in length from the underside of the head, all countersunk style heads the lengths are measured inclusive of the head.