Countersunk Head Rivet Size Chart
Looking for the right sized countersunk head rivet, but aren’t sure on what size hole you need to drill, or unsure of the rivet size you need to order? Well Scrooz Fasteners has an easy to read chart detailing what each size of rivet is in terms of length, grip range, and the drill hole size needed.
Countersunk rivets are used when a flat finish on panels, brackets, and general sheet work is needed. The head pulls down into the material during installation so the surface stays smooth and unobstructed. They're commonly used where a raised rivet head would get in the way. The flush profile helps reduce catching on edges and gives a neat, and suits a wide range of builds and repairs, like metal fabrication, cabinet work, hinges, brackets, plates and assemblies.
Countersink rivets are supplied in trade boxes, and bulk cartons for volume users to keep pricing as low as possible. All orders from Scrooz Fasteners over 499 ship for free, Australia wide.
Our rivet range can be found below:
Scrooz Dome Head Rivets Range
Scrooz Countersunk Head Rivets Chart
| Rivet # | Size (mm) | Min Gip (mm) | Max Grip (mm) | Drill Size |
|---|---|---|---|---|
| #42 | 3.2 x 6.5mm | 2.3mm | 3.2mm | 3.2mm |
| #43 | 3.2 x 8.0mm | 3.3mm | 4.8mm | 3.2mm |
| #44 | 3.2 x 10.0mm | 4.9mm | 6.4mm | 3.2mm |
| #45 | 3.2 x 11.5mm | 6.0mm | 8.0mm | 3.2mm |
| #46 | 3.2 x 13.0mm | 8.6mm | 9.6mm | 3.2mm |
| #48 | 3.2 x 16.0mm | 9.6mm | 12.8mm | 3.2mm |
| #53 | 4.0 x 9.0mm | 3.0mm | 4.8mm | 4.0mm |
| #54 | 4.0 x 10.5mm | 4.9mm | 6.4mm | 4.0mm |
| #56 | 4.0 x 13.5mm | 6.5mm | 9.5mm | 4.0mm |
| #62 | 4.8 x 8.0mm | 2.3mm | 302mm | 4.8mm |
| #63 | 4.8 x 9.5mm | 3.3mm | 4.8mm | 4.8mm |
| #64 | 4.8 x 11.0mm | 4.9mm | 6.4mm | 4.8mm |
| #66 | 4.8 x 14.5mm | 8.0mm | 9.5mm | 4.8mm |
| #68 | 4.8 x 17.5mm | 9.6mm | 12.8mm | 4.8mm |
| #610 | 4.8 x 20.0mm | 12.8mm | 6.4mm | 4.8mm |