Screw Dogs Zinc Plated 8g x 32mm Grab Pack of 100
Self Tapping Universal Screw Fixings for Internal Use
Screw Dogs are universal multi-use, multi-substrate screw fixings designed to fix to most materials, eliminating the need to carry lots of different types of screws and fixings, These screws are great for fast, light duty fixing direct to gyproc, timber, sheet materials, concrete, brick, block and general masonry without any plugs or sleeves and with no expansion. They are easily and rapidly installed into plasterboard with the sharp point and aggressive thread providing a strong hold without pre-drilling. They can also be installed into any masonry and concrete with 5mm pilot hole (4mm for softer materials) and then driving the screw in using a power or impact driver, Screw Dogs are removable, re-usable and fire resistant.
We make them tough too, using high performance high strength steel specially heat treated in a multi-stage complex process to remove any brittleness, meaning you can drive these into concrete with an impact driver all day. Heads are specifically designed with strength in mind to avoid shearing, along with a 'solid connection' No2 square drive for powerdriving without chatter. Plus our proprietory saw tooth threadform ensures clean, accurate and fast cutting in all masonry and concrete applications.
CR3+ SafePlate bright zinc plated finish for internal use and operator safe corrosion protection. Supplied in convenient grab packs or heavily discounted trade and bulk boxes for volume users. Also available with our Screw Armour ceramic coating for external use.
Main applications include rapid fixing of
- General wall fixtures
- Lighting and electrical
- Brackets and assemblies
- Tracks and channels
- Ducting and building services
- Plumbing fixtures
- Fire safety accessories
- Hardware and ironmongery
- General fixtures and fittings
Installation info :
|Substrate||Drill Size||Typical Load Rating|
|Gyprock, Fire board, General wall board||Not required||5-10kg*|
|Soft masonry: Block, Brick, Sandstone etc||4.0mm*||10-15kg*|
|Hard masonry and Concrete||5.0mm*||30-40kg*|
*Drill sizes may be varied according to the strength of the substrate, load values are for guidance only and dependant on subsatre strength, professional site testing should be carried out under if structurally critical.
Be The First To Review This Product!
Help other scrooz users shop smarter by writing reviews for products you have purchased.